Fluid polishing machine is suitable for polishing of special-shaped workpieces
The fluid polishing machine needs surface deburring, descaling, flash removal, and improvement of the surface brightness of the workpiece for special-shaped metal parts, hardware products, plastic parts and other special-shaped workpieces. Traditional polishing equipment or manual grinding treatment may not be able to handle the inside. For holes, gaps, corners and other parts, the special fluid polishing machine produced by Kunshan Xihua can perform grinding and polishing treatment on these parts. It uses a semi-solid fluid abrasive to reciprocate grinding on the surface of the part to be processed under the action of a fluid polishing machine, grinding and polishing various cavities, cross apertures and edges of the parts, and chamfering R angles. Deburring etc. Since the fluid abrasive is soft and can enter the workpiece holes, gaps, corners, etc., it is possible to polish these parts that are not easy to handle by conventional methods.
Abrasives with different particle sizes and viscosities used in fluid polishing machines, under pressure, select appropriate process parameters, and the surface roughness of the parts can be increased by 2-3 levels after honing for 3-5 minutes on the basis of the original surface roughness, the highest The roughness can reach 0.05, and the precision can be controlled at the micron level. First widely used in precision metal processing industry.
At present, our company has two types of fluid polishing machines imported from Taiwan and domestically produced. Please consult us for specific details.